Malaysia
Singapore
Thailand
InternationalYour shopping cart is empty!
Your shopping cart is empty!
New
-20%OMG! This small yet powerful motor is a great solution for a small robot with a 2-pin JST(PHR-2) connector. This motor is being used on rero:micro robot:)We have been..
RM18.50 RM14.80
-5-1-1-268x268.jpg "16GB Micro SD Card with NOOBS for RPI")
-20%This is 16GB, Class A1 micro SD card. Preloaded with NOOBS (New Out Of Box Software), and we are taking it from Raspberry Pi Foundation. Yes, all the way from the UK...
RM45.00 RM36.00
-20%If you've been searching for distance measurement and object detection sensor at rock-bottom price, look no further! This legendary HC-SR04 ultrasonic sensor is your perf..
RM4.00 RM3.20
-10%Note: You might want to check out Cytron's latest Maker Drive, which is a good alternative for your project :) Maker Drive is dual channel motor driver with reverse polar..
RM7.50 RM6.75
-9% Maker UNO was 1825% funded in Kickstarter on 17 Apr 2018. Thank you to the 1878 backers for your support!    WHAT IS MAKER UNO?  The ..
RM55.00 RM49.90
-10%micro:bit is a tiny programmable computer, designed to make learning and teaching easy and fun! This microbit Quick Start Kit is a STEAM education kit designed to include..
RM110.00 RM99.00
-10%Note: Starting 15th September 2019, all TT motor (Yellow) comes with Red and Black wires soldered.This is a low-cost mobile robot kit that comes with everything you n..
RM21.00 RM19.00
-50% Specification: Low-cost on board temperature sensor Calibrated directly in oCelsius TO-92 PackageTutorials:LM35 temperature ..
RM8.00 RM4.00
-3%Note: Due to the distribution region, this product can ONLY be shipped to ASEAN countries (Malaysia, Singapore, Thailand, Indonesia, Vietnam, Philippines, and Brunei)..
RM179.00 RM174.00
-9%Note: Due to the distribution region, this product can ONLY be shipped to ASEAN countries (Malaysia, Singapore, Thailand, Indonesia, Vietnam, Philippines, and Brunei)..
RM240.00 RM219.00
-67%Features: IR Transmitter Chip material:AIGaAs Emitted color:infrared Lens:5mm, water clear Low power consumption, high efficiency..
RM1.50 RM0.50
-38%
New
-14%  The Junior Kit for micro:bitThis microbit Junior kit is a basic kit to kick start the digital making. Perfect for primary and secondary school stude..
RM79.90 RM69.00
-9% Maker UNO was 1825% funded in Kickstarter on 17 Apr 2018. Thank you to the 1878 backers for your support!  Save more with this School Package! Get 11 sets..
RM550.00 RM499.00
-17%Note: Due to the rising cost of raw materials, a new batch of 3D Printer filament will increase in price. Please grab the existing stock with a discounted price while the..
RM59.90 RM49.90
-88%*AVR-USBasp is now in revision 2.0 with Arduino compatible 6 way cable. This programmer is to program Atmel AVR microcontroller. Please check the list in User Man..
RM41.00 RM4.90
-26%Note: Due to the rising cost of raw materials, a new batch of 3D Printer filament will increase in price. Please grab the existing stock with a discounted price while the..
RM59.90 RM44.25
-26%Note: Due to the rising cost of raw materials, a new batch of 3D Printer filament will increase in price. Please grab the existing stock with a discounted price while the..
RM59.90 RM44.25
-78%This sensor works by having a series of exposed traces connected to ground and interlaced between the grounded traces are the sens traces. The sensor traces have a weak p..
RM13.00 RM2.90
-50%-min-5-1-1-268x268.jpg "3D Printer 1.75mm PLA Filament (Red)")
-17%Note: Due to the rising cost of raw materials, a new batch of 3D Printer filament will increase in price. Please grab the existing stock with a discounted price while the..
RM59.90 RM49.90
-min-5-1-1-268x268.jpg "3D Printer 1.75mm PLA Filament (Transparent)")
-17%Note: Due to the rising cost of raw materials, a new batch of 3D Printer filament will increase in price. Please grab the existing stock with a discounted price while the..
RM59.90 RM49.90
-26%Note: Due to the rising cost of raw materials, a new batch of 3D Printer filament will increase in price. Please grab the existing stock with a discounted price while the..
RM59.90 RM44.25
-min-5-1-1-268x268.jpg "3D Printer 1.75mm PLA Filament (White)")
-17%Note: Due to the rising cost of raw materials, a new batch of 3D Printer filament will increase in price. Please grab the existing stock with a discounted price while the..
RM59.90 RM49.90
-81%Grove - Temperature Sensor uses a thermistor to measure ambient temperature. The resistance of thermistor changes based on ambient temperature. This resistance value alte..
RM13.00 RM2.50
-5-1-1-268x268.jpg "Grove - Ultrasonic Ranger")
-21%This Grove-ultrasonic sensor is a non-contact distance measurement module which is compatible with the Grove system. It's designed for easy modular project usage with ind..
RM16.50 RM13.00
-min-5-1-1-268x268.jpg "3D Printer 1.75mm PLA Filament (Blue)")
-17%Note: Due to the rising cost of raw materials, a new batch of 3D Printer filament will increase in price. Please grab the existing stock with a discounted price while the..
RM59.90 RM49.90
-82%The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environ..
RM21.00 RM3.80
-53%Grove is a modular electronic platform for quick prototyping. Every module has one function, such as touch sensing, creating audio effect and so on. Just plug the modules..
RM209.00 RM99.00
-71%The Grove - Moisture Sensor can be used to detect the moisture of soil, to judge if there is dampness around the sensor. It can be used to decide if the plants in a garde..
RM13.00 RM3.80
-71%The Grove - Light sensor module uses  LS06-S which is the replacement for 5228 photoresistor(light dependent resistor) to detect the intensity of light in the environment..
RM13.00 RM3.80
-min-5-1-1-268x268.jpg "3D Printer 1.75mm PLA Filament (Gold)")
-26%Note: Due to the rising cost of raw materials, a new batch of 3D Printer filament will increase in price. Please grab the existing stock with a discounted price while the..
RM59.90 RM44.25
-85%This is a very useful tool to unlatch G15 and its accessories. It slid perfectly on every G15 slots to unlatch the lock. G15 cube servo and its connectors can be easily d..
RM6.00 RM0.90
-min-5-1-1-268x268.jpg "3D Printer 1.75mm PLA Filament (Light Blue)")
-26%Note: Due to the rising cost of raw materials, a new batch of 3D Printer filament will increase in price. Please grab the existing stock with a discounted price while the..
RM59.90 RM44.25
-91%Description: UIC-A (Universal ICSP Adapter) is designed as a programmer’s output socket adapter which are compatible to Cytron UIC00 programmer, Microchip PICkit programm..
RM10.00 RM0.90
-61%Line finder is designed for line following robotic. It consists of two parts - an IR emitting LED and an IR sensitive phototransistor. It can output digital signal to a m..
RM16.50 RM6.50
-85%This BlueBee wireless module is new product from Cytron Technologies, utilizing the XBee form factor, BlueBee is compatible with XBee adapter such as SKXBee (without modu..
RM68.00 RM9.90
-77%This is a simple touch sensor module. You can use it to replace a traditional push button. Using the TTP223-B touch detector IC It measures the capacitance of a metallic ..
RM16.50 RM3.80
-85%3-Axis Digital Accelerometer is the key part in projects like orientation detection, gesture detection and motion detection. This 3-Axis Digital Accelerometer(±1.5g) is b..
RM42.00 RM6.50
-82%Description: This is a breakout board for 2020 PCB Connector 8 ways. It comes pre-soldered with the male connector. It converts the signal pins to standard of 0.1" which..
RM5.00 RM0.90
%20(1)-5-1-1-268x268.jpg "3D Printer 1.75mm PLA Filament (Orange)")
-26%Note: Due to the rising cost of raw materials, a new batch of 3D Printer filament will increase in price. Please grab the existing stock with a discounted price while the..
RM59.90 RM44.25
-82%Extension wire is for extending the Cube Servo or sensors wire in case it is not long enough. Male connector can be connected to Female connector and vice versa. Extensio..
RM5.00 RM0.90
-24%The Grove Base Kit for Raspberry Pi is one of the best kits for beginners to get started with Raspberry Pi. No troublesome soldering and no complicated wiring. You ca..
RM169.00 RM129.00
-61%The Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an Infrared receiver to get the signals on the other side . An infrared ..
RM16.50 RM6.50
-5-1-1-268x268.jpg "3D Printer 1.75mm PLA Filament(Fluorescent Red)")
-26%Note: Due to the rising cost of raw materials, a new batch of 3D Printer filament will increase in price. Please grab the existing stock with a discounted price while the..
RM59.90 RM44.25
-5-1-1-268x268.jpg "3D Printer 1.75mm PLA Filament (Brown)")
-26%Note: Due to the rising cost of raw materials, a new batch of 3D Printer filament will increase in price. Please grab the existing stock with a discounted price while the..
RM59.90 RM44.25
-95%Specification:Low Profile Crystal Frequency: 8MHz Load Capacitance:18pF  Frequency Stability:± 30ppm Frequency Tolerance:± 30ppm Package: Through Hole ..
RM2.00 RM0.10
-48%The Infrared Receiver is used to receive infrared signals and also used for remote control detection. There is an IR detector on the Infrared Receiver which is used to ge..
RM16.50 RM8.50
-95%Specification:Low Profile Crystal Frequency: 10MHz Load Capacitance:18pF  Frequency Stability:± 30ppm Frequency Tolerance:± 30ppm Package: Through Hole ..
RM2.00 RM0.10
-55%Specification:M4 x 16mm (Length) Phillip pan head Material: Bright zinc plated..
RM0.20 RM0.09