USB 3.1 to M.2 Dual Protocol (NVMe/NGFF) B+M Key with USB-C Cable

Note: This M.2 case is compatible with both NVMe and SATA SSD.

Some people must be tired of using small SD cards as memory space with low performance and specifications. It's time to change! Let's upgrade to SSD storage instead of using the normal SD card. The problem is most computer, smartphone, and Raspberry Pi does not have the socket for SSD storage. To overcome this problem, you just need a portable drive!

This USB 3.1 to M.2 NVMe B+M Key Case is compatible with our MakerDisk brand,

• NVMe 2280 M-Key MakerDisk SSD
• NVMe 2242 B+M-Key MakerDisk SSD
• SATA 2280 B+M-Key MakerDisk SSD

Plus, this case can be used with 4 variations of M.2 size (2230, 2242, 2260, 2280). It also comes with a USB C to USB 3.1 cable, so that you can directly connect to Raspberry Pi or any computer.

With this external M.2 NVMe storage, you can just boot the preferred Operating System for the Raspberry Pi 4 Model B direct from the USB! Interesting right? You just have to slot in your M.2 NVMe with preloaded Raspberry Pi OS and plug it into your RPi board. No driver is needed. Plug and play, straight out of the box. :)

Note: The NVMe 2280 M-Key MakerDisk SSD is NOT included in the packing list. If you're booting up your RPi from M.2 NVMe, be sure NOT to slot in your micro SD card.

• Using NVMe and NGFF (SATA) high-speed technology, transmission speed up to 10Gbps / 5Gbps
• USB3.1 Gen 2 interface
• Aluminum alloy shell, durable, easy to carry, and fast heat dissipation
• Easy installation, no need screw to install the case
• Support Raspbian, Windows, Macintosh OS, Linux, and Android systems
• Support Raspberry Pi board, PC, Macbook, smart TV, Android type-C mobile phone, and other digital devices

Specifications:

• Enclosure Type: Dual protocol (can support both NGFF/NVMe)
• Material: Aluminum alloy
• Color: Silver
• Master Chip: Xingshuo 225
• Hard Disk Protocol:
  • M.2 NGFF
  • M.2 NVMe
  • M.2 NGFF/NVMe
• Speed: 5Gbps @ 10Gbps
• Input Interface: Type-C
• Hard Disk Interface: M-key, B+M Key
• Compatible SSD Size: 2230/2242/2260/2280
• Weight: 70g
• Dimension: 105mm x 38mm x 12mm

• 1 x USB 3.1 to M.2 Dual Protocol (NVMe/NGFF) B+M Key
• 1 x USB-C to USB 3.0 cable
• 2 x Mounting Screw

• Installation Guide: