[Holiday Notice] Please be informed that our office will be closed on September 16 in observance of a public holiday. Kindly note that all orders placed after 12:00 PM (GMT +8) on September 13 will be processed on September 17. Thank you for your understanding, and we apologize for any inconvenience caused.
This is the new, weather resistant, field-hardened, industrial level's ultrasonic sensor from Maxbotix. MaxBotix ultrasonic sensor XL series features higher resolution, longer range, higher power output and better calibration when compared to the LV version.
The WR1 uses a robust PVC housing, is designed to meet IP67 water intrusion, and matches standard electrical 3/4" PVC pipe fittings. The sensor provides very accurate readings from 0 to 765cm (0 to 25.1ft) with 1cm resolution. This sensor can be powered with anywhere between 3.3 and 5VDC.
Range information can be gathered through one of three methods - pulse width, analog and serial - all of which are active at the same time. The analog output will produce a voltage proportional to the measured distance, with a sensitivity of (Vcc/1024)V/cm. The serial interface is simple and formatted to RS-232, with voltages ranging from 0 to Vcc and terminal settings of 9600-8-N-1. There are many models under XL-WR, the one we are carrying is MB7060. It does not come with the mounting bracket.
Features:
Manufacturing model: MB7060
The sensor operates at 42KHz
Operating voltage: 3.3V to 5VDC
Range detection from 0cm to 765cm (0 to 25.1ft)
2 outputs: Analog and Serial (9600-8-N-1)
Enclosure standard: IP67
High acoustic power output
Real-time auto calibration and noise rejection for every ranging cycle
Precise narrow beam
Continuously variable gain
Object detection includes zero range of objects
Readings can occur up to every 100mS, (10-Hz rate)
The free run operation can continually measure and output range information
The triggered operation provides the range reading as desired
International
Singapore
Malaysia
Thailand
Vietnam
