Your shopping cart is empty!
LoRa 923 MHz Fiberglass 107cm 7dBi Antenna with LMR400 Coaxial Cable
- Brands Kit by Cytron Code: V-ANT7I-WRL400
Note: This gateway/hotspot 7dBi antenna comes with varying lengths of coaxial cable, 10 meters, 6 meters 4 meters, and 2 meters. Please choose your preferred bundle under the "Options".
Note: LMR400 is an upgrade version of LMR240 which has better cable loss but less flexibility because it is thicker. It is recommended to use LMR400 if your antenna is far from the hotspot, typically the RF cable length outdoor being 5 meters or more.
Kindly refer to the table below for the details of each bundle:
For some applications like in an urban environment or where large stretches of land have to be monitored the normal range of LoRa might not be enough. If you need to increase the range for your LoRa devices, this outdoor LoRa Fiberglass antenna will be the ideal addition to your LoRa system. It’s a robust solution to provide extra power and range for outdoor LoRa Base stations. The antenna has a frequency range from 919-924 MHz, VSWR lower than 1.5 and 50Ω impedance. It comes with two mounting brackets as well.
This is an example of a VSWR test for the 7dBi gain antenna. It shows the VSWR from 919 to 924 MHz frequency range is lower than 1.5, which is very good. In real-world RF components, VSWR lower than 1.5 is considered to be good! VSWR is a very important parameter in RF transmission systems where a high VSWR can reduce the power delivered to an antenna or system significantly. This can lead to the reduced range, heating of cables, damaged amplifiers, etc.
Note: Please contact a professional antenna installer to install the outdoor antenna.
This is one example of our customer in Malaysia, who changes from stock antenna (2.6dBi) to outdoor antenna (7dBi) for the Helium hotspot. You can see the huge difference in mining rewards when the user changes to the 7dBi outdoor antenna!
Note: Outdoor antenna will have a higher potential to witness other Helium hotspots. More witnessed means higher rewards!
Application:
The antenna can be used in any environment where long-range LoRa connections are required.
Kindly refer to this video to get more understanding about the antenna and which gain will be the most suitable for your antenna:
LMR400 cable is a Flexible Ultra Low Loss Communications Coaxial cable, supplied in four variations of length, 10 meters, 6 meters, 4 meters, and 2 meters.
Note: This type of cable has connectors that directly connect on the back of your Hotspot (RP-SMA) and another end to the antenna (N-Type). This cable comes with RP-SMA Male and N Female connectors.
Before you proceed to buy any type of cable for your communication setup, make sure you know to choose the right connectors for the cable. This video will explain everything you need to know about the connectors and Reverse Polarity:
Note: The hotspot is NOT INCLUDED. Please get them separately if you don't already have one.
Why choose LMR400?
LMR400 has excellent reliability, good flexibility, and ultra-low attenuation. The LMR400 cable has loss figures comparable to the extremely rigid corrugated coaxial cables however manages to achieve similar flexibility to that of high loss Radio Guide (RG) Cables. LMR400 is around 40% lower attenuation than competing RG Air-Dielectric type Cables.
All standard LMR coaxial cable comes with a UV-resistant, PE Jacket. This helps to ensure the cable jacket can withstand harsh outside environments and UV rays from sunlight, this is designed to last for up to 20 years of outdoor service.
How are the LMR400 low loss figures achieved?
This is achieved due to the cable construction specifications. The center conductor uses a high conductivity, bare copper clad covered aluminum center conductor material. The dielectric is nitrogen injected, foamed, closed-cell, Polyethylene which helps achieve 83% Velocity of Propagation. The Dielectric has an Aluminum foil outer conductor, which is chemically bonded onto it. Due to the cable construction, the attenuation is significantly lower as compared to single shielded coaxial cables.
Loss Test Verification by the manufacturer:
![]() | ![]() |
10 Meters Length | 6 Meters Length |
![]() | ![]() |
4 Meters Length | 2 Meters Length |
Note: Please SHUTDOWN your gateway/hotspot first before changing to the new antenna.
You can refer to this video for the full setup of the Helium hotspot with an LMR400 coaxial cable.
Note: Please note that the person in the video was using a different type of connector for both antenna and coaxial cable.
Antenna setup for Helium miner is very important since it can affect the mining rewards. Here are some examples of antenna setups that our happy customers share with us. The first customer uses a 7dBi antenna with LMR240 while the second one uses a 7dBi antenna with LMR400.
Antenna Electrical Specifications:
Antenna Mechanical Specifications:
Coaxial Cable Specifications: