📘Learn Digital Making weekly on Telegram. Join Channel Now📱

Khairul_Tajudin

10 Tutorials
Make Turntable using MD10-POT Motor Driver

Make Turntable using MD10-POT Motor Driver

This tutorial is application of MD10POT motor driver that can be use directly from the board without programming. The turntable is produce using 3D Printing method...
Build 1KG RC Sumo Robot using MDDRC10

Build 1KG RC Sumo Robot using MDDRC10

This is a RC Sumo Robot based on MDDRC10 Motor Driver. The sizes are 15cm(L) x 15cm(W) with below 1kg (weight). The spec is for 1kg Sumo Robot Competition..
A fatal esptool.py error occurred: Cannot configure port!

A fatal esptool.py error occurred: Cannot configure port!

This tutorial is short summarizes on common issues with ESP8266 or ESP32 Arduino base boards. It usually happens while tinkering with Arduino IDE and ESP chips...
Introduction on Programming 1KG Autonomous Sumo Robot

Introduction on Programming 1KG Autonomous Sumo Robot

This is tutorial for programming Autonomous Sumo Robot using Arduino IDE. We will show you how to use Arduino IDE and how to write a coding for the sumo robot..
1KG Autonomous Sumo Robot Starter Kit User Guide

1KG Autonomous Sumo Robot Starter Kit User Guide

This is an upgraded version of the previous 500g mini-sumo robot. This version comes with a 1kg sumo robot specification which is less than 1kg (weight) and less than 15cmx15cm (size)..
Let’s Upgrade your Mini Sumo to 1kg Sumo Robot

Let’s Upgrade your Mini Sumo to 1kg Sumo Robot

This tutorial is specially designed for robotics enthusiasts that are excited about 1kg Sumo Robot. Let’s start on this journey!..
Basic Setup on Ultimaker Cura

Basic Setup on Ultimaker Cura

In this tutorial, we will learn how to set up and explore each of the features of Ultimaker Cura and how to use it..
Peak Current vs Continuous/Rated Current

Peak Current vs Continuous/Rated Current

As an unloaded DC motor spins, it generates a backwards-flowing electromotive force that resists the current being supplied to the motor. The current through the motor drops as the rotational speed in..
Raspberry Pi: Control DC Motor using MDDS10

Raspberry Pi: Control DC Motor using MDDS10

There are several methods to control DC motors using Raspberry Pi. The suitable method for your application depends on how many PWM outputs you have and what performance you expect out of those output..
Raspberry Pi: GUI with a Remote Desktop Connection

Raspberry Pi: GUI with a Remote Desktop Connection

In the LED Blinking tutorial, we use serial command line and software PuTTY to give a command in the Raspberry Pi. For this tutorial, we will use Remote Desktop Connection as our interface to pro....