Falcon 2 Laser Engraver and Cutter come with a 12W Laser module that can cover 25000 mm/min Ultra Fast speed. It has 0.06*0.08mm Laser Spot with new integrated air assist. Additionally it has a Three-Step focusing and Triple monitoring system to improve the efficiency of the Laser Engraver.

Infinite Potential, Boundless Creativity

Take a Closer Look

25000mm/min Amazing Speed

With 100% improvement in carving efficiency, Falcon2 allows you to speed less time creating more. 

12W Laser Module

Improve photoelectric conversion efficiency, beam quality and reliability to a standard comparable to 20W produced

by adopting new package cooling technology. Cut 10mm wooden board with one pass.

0.06*0.08mm Laser Spot

Spot compression technology reduces the engraving line's width for finer detail and significantly improves its cutting

capacity, enabling engraving on materials like metal,stainless steel, ceramics, and glass.

Three-Step, Three-Second Focusing

1. Place the fixed focus strip under the laser head. 

2. Loosen the screws and adjust the laser head to the corresponding thickness of the fixed focus strip.

3. Tighten the screws holding the laser head in place and remove the fixed focus strip.

Groundbreaking Integrated Air Assist

Manually adjust the air assist steplessly through the knob, or it can automatically adjust the airflow through

LightBurn, to remove

Airflow Monitoring

Indicates the current airflow volume. It enables you to adjust the airflow, based on your engraving needs.

Lens Monitoring

Built-in lens monitoring systems will trigger an alarm when the lens is dirty enough, which helps avoid

 lens breakage and frequent replacement.

Flame Monitoring

When a flame is detected, the indicator, will flash red with an alarm and the machine will stop immediately.

Extensive Compatibility

Compatible with a variety of systems, including Windows and macOS systems, and software such as LaserGRBL and LightBurn.

Get Things Done with Less Hassle

Only 3 steps are needed for full assembly. You can enjoy creating as soon as possible.

​​​​​

Support Offline Creating

Just insert a TF card, and you can feel free to create anytime, anywhere

Offline Dynamic Preview

Position and adjust precisely without connecting to a computer. Short press to fine-tune 1mm, and long press to adjust 10mm/s.

Take the Experience Further

There are 3 adjustment holes on the bottom of the machine to suit different table sizes.

Outstanding Motion Stability

There are 3 adjustment holes on the bottom of the machine to suit different table sizes.

Bidirectional Limit Switch

If the laser head hits the boundary, the machine will stop automatically and a buzzer will sound an alarm.

Active Stop Function

The machine will stop working in case of accidental tilt, flip or drop, with the buzzer and indicator sending an alert.

Security Feature 

Specifications:

• Model: 12W

• Machine Power: Max.120W

• Laser Module Output Power: 12W

• Laser Spot: 0.06*0.08mm

• Wavelength: 455±5mm

• Engraving Speed Max. 25000mm/min

• Working Area: 400mm*415mm

• Voltage Input: 100-240V~ 50-60Hz

• Voltage Output: DC 24.0V 5A

• Connecting Interfaces: TF Card, Type-C

• Certification: IEC60825, FDA, CE, ROHS, FCC, UKCA, UL Report, PSE etc.

• Operating System: Windows, MacOS

• Control Software: LightBurn, LaserGRBL

• File Type(s): jpeg, jpg, png, bmp, svg, dxf etc.

• Net Weight: 6.8kg

• Gross Weight: 10.35kg

• Product Size (L * W * H): 664*570*173mm

• Package Size (L * W * H) : 725*625*150mm

• Material for Engraving: Cardboard, Felt, Cardboard, Wood, Bamboo, Leather, Fabric, Acrylic, Brushed Stainless Steel, Dark Anodized Aluminum, Painted Metal, etc.

• Material for Cutting: Cardboard, Felt, Cardboard,Wood, Bamboo, Leather,Fabric, Acrylic, Brushed Stainless Steel etc.

1 x Creality Falcon2 12W Laser Engraver and Cutter Set

Part List

1. Machine Frame x 1

2. Raiser Stand (including pads) x 4

3. Raiser Stand (without pad) x 4

4. Laser Module x 1

5. Air Pump x 1

6. USB-C Cable x 1

7. Multi-level Fixed Focus Block x 1

8. Goggles x 1

9. Basswood Board x 3

10. Anti-static Brush x 1

11. Storage Box x 1

12. Power Supply x 1

13. M1.5/M2/M2.5/M3 Allen Wrench x 1

14. Open-end Wrench x 1

15. TF Card & Card Reader x 1

16. USB-A to USB-C Adapter x 1

17. Key x 2

18. Protective Lens x 1

19. M3X10 / M4X6 Hexagon Socket Head Screw x 4

20. Dust-free Cloth x 1

21. Black Cable Straps x 3

22. Metal Protection Plate x 1

23. Tweezers x 1

• User Manual
• Troubleshooting
• FAQ
• Recommend Parameter