This RGB LED HAT gives your Raspberry Pi (Zero or 3B) the capability to display colorful effect, and controlled by only one signal pin. This HAT consist of 64 of RBG LED (WS2812B). These RGB LEDs are controllable Schedvia only 1 pin and addressable (each and every LED can be controlled).
Just stack this pHAT onto your Raspberry Pi Zero or 3B+, the hardware setup is done. It is that simple!
Features:
Supports any revision of Raspberry Pi (directly-pluggable)
Onboard 8 × 8 RGB LED (WS2812B)
Control pin is configurable via jumpers (0Ω resistor), by default is connected to P18 of Raspberry Pi GPIO.
Break out control pins, easy for working with other MCUs
Comes with development resources and manual (examples in Python and Web control)
Specifications:
Operating voltage: 5VDC
Brightness: adjustable 256 levels
Color depth: 24-bit true color (8-bit for R/G/B respectively, totally 256x256x256=16777216 colors)
Data rate: 800Kbps(typ)
Dimension: 65mm × 56.2mm
Mounting hole size: 3.0mm
Although it is designed as Raspberry Pi HAT, but you can still use it with any MCU:
5V ↔ 5V power
GND ↔ GND
DIN ↔ Signal input
Dimension:
Packing List:
1 x RGB LED 8x8 HAT board
2 x 10mm spacer (2.00 mm diameter) with screws and nuts