Note: These are options for the RetroFlag PiStation Case, please choose your preferred kit under the Available Options:

RPi 4B 8GB+RetroFlag PiStation	RPi 4B 4GB+RetroFlag PiStation	RPi 4B 2GB+RetroFlag PiStation	RPi 4B 1GB+RetroFlag PiStation	RetroFlag PiStation Case Only

Now, The Most Powerful Raspberry Pi Comes with

8GB, 4GB, 2GB or 1GB RAM

The Raspberry Pi is a series of small single-board computers developed by the Raspberry Pi Foundation in the UK to promote the teaching of basic computer science in schools and in developing countries. The original model became far more popular than anticipated, getting outside its target market for uses such as automation, multimedia, robotics, IoT, and now even in IR4.0.

The Latest RetroFlag PiStation Case

Feeling nostalgic with 90's era retro games? Cytron Marketplace brings this RetroFlag Raspberry Pi 4B PiStation Case to you!

With the classic retro game console outlook, it includes many clever fully functional features on the case. The power (safe shutdown), reset and open (eject) buttons will allow you to control the power and protect your Raspberry Pi mainboard inside the case.

Note: Safe shut down scripts are necessary. Get the safe shutdown scripts here.

You also have access to all of its ports and connections once you've installed your Raspberry Pi inside, including MicroSD, audio, power, 2x USB 3.0, micro-HDMI x2, and Ethernet. You'll never have to remove your Raspberry Pi again!

RetroPie has just released version 4.8 on 14th Mar 2022 (Pi Day), please check out the demo from Floob, you can download the latest RetroPie image here.

What Else Do You Need to Get Started?

 

 

1. A good power supply or power adapter - Because Raspberry Pi 4 Model B comes with USB-C for input power, you will need USB-C Power Adapter. Get the official adapter from Raspberry Pi Foundation here:
   • UK Plug White Color, suitable for Malaysia, Singapore, Brunei, Cambodia, Sri Lanka, UAE
   • UK Plug Black Color, suitable for Malaysia, Singapore, Brunei, Cambodia, Sri Lanka, UAE
   • EU Plug White Color, suitable for Thailand, Indonesia, Vietnam, Philippines
   • EU Plug Black Color, suitable for Thailand, Indonesia, Vietnam, Philippines
2. As always, a good storage to keep the Operating System and Retrogame image is necessary, you can opt for either a microSD card or a 2.5" SSD:
   • 2.5" 120GB SATA III SSD (Solid State Drive) + USB 3.0 to 2.5" SSD Adapter
   • Raspberry Pi Approved 128GB Class 10, A1 MakerDisk MicroSD + USB MicroSD Card adapter
   • Raspberry Pi Approved 64GB Class 10, A1 MakerDisk MicroSD + USB MicroSD Card adapter
   • Raspberry Pi Approved 32GB Class 10, A1 MakerDisk MicroSD + USB MicroSD Card adapter
3. With dual HDMI ports and limited space, the Raspberry Pi 4 Model B can only utilize a micro HDMI socket. You can grab the:
   • Official micro HDMI to standard HDMI cable, white, 1 meter
   • Official micro HDMI to standard HDMI cable, white, 2 meters
   • Official micro HDMI to standard HDMI cable, black, 1 meter
   • Official micro HDMI to standard HDMI cable, black, 2 meters separately in case you do not have one.
4. Classic Retro Super Nintendo USB Gamepad, of course, you will need a gamepad/joystick to play the game.
5. A TV or LCD Monitor with a built-in Speaker and with HDMI multimedia input port:
   • 13.3-in IPS 1920x1080 HDMI Display with Built-in Speaker
   • BenQ 22-inch IPS HDMI FHD Built-in Speaker Monitor

• Raspberry Pi 4 Model B Board:
  • Broadcom BCM2711, 64-bit ARM Cortex-A72 (ARMv8), Quad-core, 28nm Processor SoC running @ 1.5GHz, with a metal body for better heat dissipation.
  • LPDDR4 SDRAM
    • 8GB
    • 4GB
    • 2GB
    • 1 GB
  • 2 x USB3.0 Port + 2 x USB2.0 Port
  • Expanded 40-pin GPIO Header
  • Video/Audio Out:
    • 4-pole 3.5mm connector
    • 2 x micro HDMI port, support 4Kp60 video, dual display
    • Raw LCD (DSI)
  • Image/Camera input: CSI port
  • Storage: MicroSD
  • True Gigabit Ethernet, >900 Mbps
  • Power-over-Ethernet (PoE) support (requires separate PoE HAT)
  • 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 5.0 and BLE (Bluetooth Low Energy)
  • Low-Level Peripherals:
    • 27 x GPIO
    • UART
    • I2C bus
    • SPI bus with two chip selects
    • +3.3V
    • +5V
    • Ground
  • Power Requirement, 5V/3.0A via USB type C connector.
  • Supports Raspbian, and check 3rd party Operating System here.
  • Dimensions: 85mm x 56mm x 17mm

• RetroFlag PiStation Case:
  • Specifically designed for the Raspberry Pi 4 
  • Dual USB ports on the front for controllers (RPI 4, not included, supports Bluetooth controllers as well)
  • Safe Shutdown and Safe Reset
    PiStation Case can have SAFE SHUTDOWN and SAFE RESET functions.
    Note: Scripts are necessary. Get the safe shutdown scripts here: https://github.com/RetroFlag/retroflag-picase
  • Play Station Style
    Pi case applies the most iconic element in the retro game world as a homage to the most classic console ever made.
  • Micro SD card slot on the side
    The micro SD card slot on the side allows more space for you to operate more freely.
    Note: The micro SD card is NOT included. Please get it separately here.
  • Dimension:
    • Width: 134.70mm
    • Depth: 94.50mm
    • Height: 38.70

• Raspberry Pi 4 Model B 8GB with RetroFlag PiStation Case Kit
  • 1 x Raspberry Pi 4 Model B, 8GB board
  • 1 x RetroFlag PiStation Case:
    • 1x Retroflag PiStation Case
    • 1x Screwdriver
    • 1x Instruction Manual
  • 1 x 17.5W 5V 3.5A USB-C Universal Power Adapter - UK-EU-US Plug
  • 1 x 32GB Raspberry Pi Approved MakerDisk MicroSD Pre-loaded with Raspberry Pi OS
  • 1 x Micro-HDMI to Standard HDMI Cable - Black
  • FREE! 1 x USB2.0 MicroSD Card Reader/Writer

• Raspberry Pi 4 Model B 4GB with RetroFlag PiStationCase Kit
  • 1 x Raspberry Pi 4 Model B, 4GB board
  • 1 x RetroFlag PiStation Case:
    • 1x Retroflag PiStation Case
    • 1x Screwdriver
    • 1x Instruction Manual
  • 1 x 17.5W 5V 3.5A USB-C Universal Power Adapter - UK-EU-US Plug
  • 1 x 32GB Raspberry Pi Approved MakerDisk MicroSD Pre-loaded with Raspberry Pi OS
  • 1 x Micro-HDMI to Standard HDMI Cable - Black
  • FREE! 1 x USB2.0 MicroSD Card Reader/Writer

• Raspberry Pi 4 Model B 2GB with RetroFlag PiStation Case Kit
  • 1 x Raspberry Pi 4 Model B, 2GB board
  • 1 x RetroFlag PiStation Case:
    • 1x Retroflag PiStation Case
    • 1x Screwdriver
    • 1x Instruction Manual

• Raspberry Pi 4 Model B 1GB with RetroFlag PiStation Case Kit
  • 1 x Raspberry Pi 4 Model B, 1GB board
  • 1 x RetroFlag PiStation Case:
    • 1x Retroflag PiStation Case
    • 1x Screwdriver
    • 1x Instruction Manual

• RetroFlag PiStation Case ONLY:
  • 1x Retroflag PiStation Case
  • 1x Screwdriver
  • 1x Instruction Manual

• RetroFlag PiCase documents
• Safe shutdown scripts, https://github.com/RetroFlag/retroflag-picase
• RetroPie Download page
• Raspberry Pi Getting Started by raspberrypi.org
• Raspberry Pi Projects and tutorials
• Raspberry Pi 4B Product Brief (Updated with 8GB board)
• Raspberry Pi 4B Mechanical Drawing
• Raspberry Pi Foundation, the official website
• Using Raspberry Pi Imager, by Raspberry Pi Foundation
• Raspberry Pi Imager
• Raspberry Pi OS Download page