📘Learn Digital Making weekly on Telegram. Join Channel Now📱
New Nano Base (B) Board for Raspberry Pi Compute Module 4

Nano Base (B) Board for Raspberry Pi Compute Module 4

    • Login to view ProMaker's Insider Price!
    • RM95.00
    • 5 or more RM90.25
    • 20 or more RM85.50
  • Cashback: RM2.85
  • CytronCash Balance: Login
  • Availability:
    37

Accessories you may need

Enter desired quantity before clicking 'Add to Cart' button

Heatsink for CM4 with Antenna Opening

Heatsink for CM4 with Antenna Opening

  • 5 or more RM17.10
  • 20 or more RM16.20

RM18.00

High Profile Heatsink for CM4 with Antenna Opening

High Profile Heatsink for CM4 with Antenna Opening

  • 5 or more RM22.80
  • 20 or more RM21.60

RM24.00

  • Total accessories: RM0.0
  • Grand total: 95

  • Product Code: CM4-NANOB
  • Warranty Period: 12 months
Description

Note: This Nano Base Board (B) DOES NOT come with Raspberry Pi Compute Module 4. Please get CM4 separately here:

Note: The 40-pin GPIO headers are NOT Soldered onto Nano Base Board (B), you will need to solder it if you need to use it.

 


Nano Base Board (B) For CM4

This is the basic baseboard for Raspberry Pi Compute Module 4, it supports both the Lite version (without onboard eMMC) and with eMMC of CM4. Not to forget the wireless and non-wireless versions of CM4.

Same Size As The CM4

Standard CM4 Socket, With Multiple Peripheral Interfaces, Suitable For Narrow Application Environments.

Note: The CM4 is NOT included. Please buy it separately if necessary.

Note: The 40-pin GPIO Headers are NOT pre-soldered out of the box.

 

What's On Board

  1. CM4 socket: Suitable for all variants of Compute Module 4, for stacking CM4
  2. Micro SD card slot: For connecting a Micro SD card with a pre-burnt image (Lite variant ONLY)
  3. 40-PIN GPIO Pads: Suitable for connecting to various HAT modules, the 40-pin GPIO headers are included but NOT soldered out of the box
  4. Gigabit Ethernet RJ45 Port/Connector: True Gigabit Ethernet Port
  5. Power supply / Programming: 5V power supply, or used for eMMC burning
  6. 3.5mm Audio Jack
  7. User Button: Programmable button connected to GPIO21 and pulled up by default
  8. USB2.0 interface: For connecting sorts of USB devices
  9. CSI interface: 1 × MIPI CSI camera interface
  10. DSI interface: 1 x MIPI DSI display interface
  11. MP1658: DC buck circuit to power 3.3V for DSI, CSI and GPIO
  12. Mini HDMI Connector: Supports 4K 30fps output
  13. BOOT slide switch:
    1. ON: Switch USB to Type C interface, CM4 will enter download mode when powered on (configured as a large-capacity disk through RPI boot)
    2. OFF: Switch USB to Type-A interface, will not enter download mode when powered on (CM4 will boot from eMMC or Micro SD card)

Note:

  • DO NOT hot-plug any devices except the USB and HDMI.
  • The USB2.0, CSI, DSI and Audio interfaces are disabled by default on CM4 and need to be enabled by the user.

 

    Features
    • The Compact yet comprehensive Board for CM4 evaluation and even deployment.
    • NETWORKING: Gigabit Ethernet RJ45 Port, suitable for CM4 without built-in wireless
    • CM4 SOCKET: suitable for all variants of Compute Module 4
    • CONNECTOR: 1x Raspberry Pi 40-pin GPIO interface, GPIO header pins are NOT pre-soldered
    • USB: 1 x USB 2.0 Type-A interface
    • CAMERA: 1 x MIPI CSI-2 port (15-pin 1.0mm FPC connector)
    • DISPLAY: 1 x MIPI DSI port (15-pin 1.0mm FPC connector)
    • VIDEO: 1 x Mini HDMI Port, supports 4K 30pfs output
    • AUDIO: 3.5mm Jack
    • STORAGE: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants
    • POWER INPUT: 5VDC via USB-C port
    • DIMENSIONS: 56 × 41mm

    Packing List
    • 1 x Nano Base Board (B) for CM4
    • 1 x 40-pin GPIO Headers

    Q & A

    No questions have been asked about this product.

    Ask a question

    Reviews (2)

    Tags: CM4, Nano Base Board, Raspberry Pi Compute Module, eMMC, Lite, Wireless, Model B, CM4 Nano