📘Learn Digital Making weekly on Telegram. Join Channel Now📱

Mini Tower UPS Kit for Raspberry Pi 4 Model B and Kits

  • Brands 52Pi Code: V-MTK-UPS MPN:
Special Offer
RM368.18 - RM857.60
RM449.00 - RM857.60 - 18%
Cashback: RM11.05 - RM25.73
  • Kit + RPi 4B 8GB
  • Kit + RPi 4B 4GB
  • Kit + RPi 4B 2GB
  • Kit + RPi 4B 1GB
  • Kit Only
Availability: 40

Buy locally from a partner

Country:
Description

Note: These are options for the 52Pi's Mini Tower UPS Kit, please choose your preferred kit under the Available Options:

Note: Do check the packing list to verify the content of each kit.

RPi 4B 8GB+Mini Tower UPS KitRPi 4B 4GB+Mini Tower UPS KitRPi 4B 2GB+Mini Tower UPS KitRPi 4B 1GB+Mini Tower UPS KitMini Tower UPS Kit Only

 

 


 

Now, The Most Powerful Raspberry Pi Comes with

 

8GB, 4GB, 2GB or 1GB RAM

 

The Raspberry Pi is a series of small single-board computers developed by the Raspberry Pi Foundation in the UK to promote the teaching of basic computer science in schools and in developing countries. The original model became far more popular than anticipated, getting outside its target market for uses such as automation, multimedia, robotics, IoT, and now even in IR4.0.

 

This is a 3D printed Case for Raspberry Pi 4B and UPS PLUS. The material of case is made of PLA, and the side is made of transparent acrylic material. Ice tower cooler can be placed into the case with Raspberry Pi 4B and UPS Plus. The 0.96 inch OLED screen provided in kit can display the running status of Raspberry Pi or UPS Plus through programming.

Note: Raspberry Pi 4B is NOT included in the package.

It is a Mini Tower UPS Kit for the Raspberry Pi 4 Model B, compatible with:

Note: Since the case is printed by FDM 3D printer and is made of PLA material, the surface of the case will have a little roughness, which is normal and does not affect the use. If necessary, you can polish it by yourself.

 

UPS Plus

The Mini Tower Kit comes with a uninterruptible power supply (UPS). UPS Plus is a new generation of UPS power management module which supports OTA firmware upgrade and supports RTC onboard. And there are two INA219 chip onboard to detect batteries voltage and the voltage output from UPS Plus to Raspberry Pi.

 

0.96" OLED Display

The Mini Tower UPS Kit also comes with 0.96 Inch OLED Module is a mini display screen with 128X64 resoluction and SSD1306 chipset.
It is standard IIC communication interface pinout compatible with most MCU development board such as arduino, Raspberry Pi,C51 series etc.

You can refer here on How to enable OLED screen and How to display UPS information on OLED.

Wiring diagram:

 

Ports definition:

 

How to assemble:

  • Fix the copper pillar to 3D printing case.
  • Fix UPS Plus with short copper pillar.
  • Fix Raspberry Pi 4B with short copper pillar and make sure the pogopin is against to the GPIO Pin.
  • Fix the metal bracket of low profile ice tower cooler with M2.5 screws.
  • Fix low profile ice tower cooler to Raspberry Pi with M2.5 screws.
  • Fix 0.96 inch OLED display to the case with glue gun or tape, and connect the pins to GPIO according to the wiki's circuit diagram.
  • Fix two side with acrylic panel with screws.
  • You can also fix the fan to the arcrylic panel on the side


 

What Else Do You Need to Get Started?

 

  1. A good power supply or power adapter - Because Raspberry Pi 4 Model B comes with USB-C for input power, you will need USB-C Power Adapter. Get the official adapter from Raspberry Pi Foundation here:
  2. As always, good storage to keep the Raspberry Pi Operating System or other OS images is necessary, you can opt for either a microSD card:
  3. With the RPi micro HDMI ports, the Mini Tower UPS Kit can utilize the Official RPi micro HDMI cable. You can grab the:
  4. A TV or LCD Monitor with a built-in Speaker and with HDMI multimedia input port:

 

    Warranty Period: 12 months
    Features
    • Raspberry Pi 4 Model B:
      • Broadcom BCM2711, 64-bit ARM Cortex-A72 (ARMv8), Quad-core, 28nm Processor SoC running @ 1.5GHz, with a metal body for better heat dissipation.
      • LPDDR4 SDRAM
        • 8GB
        • 4GB
        • 2GB
        • 1 GB
      • 2 x USB3.0 Port + 2 x USB2.0 Port
      • Expanded 40-pin GPIO Header
      • Video/Audio Out:
        • 4-pole 3.5mm connector
        • 2 x micro HDMI port, support 4Kp60 video, dual display
        • Raw LCD (DSI)
      • Image/Camera input: CSI port
      • Storage: MicroSD
      • True Gigabit Ethernet, >900 Mbps
      • Power-over-Ethernet (PoE) support (requires separate PoE HAT)
      • 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 5.0 and BLE (Bluetooth Low Energy)
      • Low-Level Peripherals:
        • 27 x GPIO
        • UART
        • I2C bus
        • SPI bus with two chip selects
        • +3.3V
        • +5V
        • Ground
      • Power Requirement, 5V/3.0A via USB type C connector.
      • Supports Raspbian, and check 3rd party Operating System here.
      • Dimensions: 85mm x 56mm x 17mm

     

    Packing List
    • Raspberry Pi 4 Model B 8GB with Mini Tower UPS Kit
      • 1 x Raspberry Pi 4 Model B, 8GB board
      • 1 x Mini Tower UPS Kit
        • 1 x 3D printing Case
        • 2 x Acrylic side panel
        • 2 x 0.96 inch OLED Display and jumper wires
        • 1 x UPS Plus Module with screws and copper pillars
        • 1 x Low profile Ice tower cooler kit
      • 2 x 3.7V 2000mAh Li-Ion Battery

     

    • Raspberry Pi 4 Model B 4GB with Mini Tower UPS Kit
      • 1 x Raspberry Pi 4 Model B, 4GB board
      • 1 x Mini Tower UPS Kit
        • 1 x 3D printing Case
        • 2 x Acrylic side panel
        • 2 x 0.96 inch OLED Display and jumper wires
        • 1 x UPS Plus Module with screws and copper pillars
        • 1 x Low profile Ice tower cooler kit
      • 2 x 3.7V 2000mAh Li-Ion Battery

     

    • Raspberry Pi 4 Model B 2GB with Mini Tower UPS Kit
      • 1 x Raspberry Pi 4 Model B, 2GB board
      • 1 x Mini Tower UPS Kit
        • 1 x 3D printing Case
        • 2 x Acrylic side panel
        • 2 x 0.96 inch OLED Display and jumper wires
        • 1 x UPS Plus Module with screws and copper pillars
        • 1 x Low profile Ice tower cooler kit
      • 2 x 3.7V 2000mAh Li-Ion Battery

     

    • Raspberry Pi 4 Model B 1GB with Mini Tower UPS Kit
      • 1 x Raspberry Pi 4 Model B, 1GB board
      • 1 x Mini Tower UPS Kit
        • 1 x 3D printing Case
        • 2 x Acrylic side panel
        • 2 x 0.96 inch OLED Display and jumper wires
        • 1 x UPS Plus Module with screws and copper pillars
        • 1 x Low profile Ice tower cooler kit
      • 2 x 3.7V 2000mAh Li-Ion Battery

     

     

    • Mini Tower UPS Kit Only
      • 1 x 3D printing Case
      • 2 x Acrylic side panel
      • 2 x 0.96 inch OLED Display and jumper wires
      • 1 x UPS Plus Module with screws and copper pillars
      • 1 x Low profile Ice tower cooler kit

    Q & A

    Ask a question

    Reviews
    No Review Found

    Tags: Mini Tower UPS Kit, UPS case, Ice Tower Case, Case for Raspberry Pi 4B, RPi Active Cooling