Gigabit PoE 48V 0.5A Adapter/Injector

Well, since Raspberry Pi 4 Model B is at par with entry-level desktop computers, and it can support Power Over Ethernet (PoE) with the PoE HAT, many have been asking for a PoE injector or adapter to enable the single board computer to be power via Ethernet from any router :) Here you go, a Gigabit PoE injector. With this adapter, Raspberry Pi 4 Model B can now be powered from a normal Ethernet router or network switch.

This Gigabit PoE Injector is IEEE 802.3af/at compliance, offering through 48V PoE through Ethernet cable and also protects the target device while delivering Gigabit Ethernet Speed too.

Obviously, we have tested with Raspberry Pi 4 Model B boards and the PoE HAT and the Flexible Gigabit Ethernet cable :) It powered up the Pi without any problem and we manage to get maximum speed the router too, via iperf3. Not to forget it is compatible with Raspberry Pi 3 Model B+ too.

Note: This injector comes with UK Plug.

Features:

• Gigabit PoE injector
• AC Plug: UK Plug, type G
• AC Input: 100 to 240VAC, 50 to 60Hz, 0.75A (Max)
• Output: 48VDC, 0.5A
• Power: 24W
• Ethernet Speed: 10/100/1000 Mbps
• IEEE 802.3af/at compliance
• PoE Connections:
  • Data: 1, 2, 3, 6
  • Power: 4&5(+), 7&8(-)
• Efficiency: > 82.1%
• Safety Certification: UL60950, EN60950-1, EN61000, ANSI C63.4
• MTBF: 8 hours daily, > 50,000 hours
• Operation temperature: 0ºC to 40ºC
• Compatible with:
  • Raspberry Pi 3 Model B+ and PoE HAT or PoE+ HAT
  • Raspberry Pi 4 Model B 1GB, 2GB, 4GB and PoE HAT or PoE+ HAT

Packing List:

• 1 x Gigabit PoE 48V Adapter/Injector
• 1 x UK Plug AC power cord