5.83 inch E-Ink Raw Display Panel - Dual-color

This is an E-Ink raw display, 5.83 inch, 648×480 pixels resolution, with an embedded controller, communicating via SPI interface, supports black and white dual-color display.

Due to the advantages like ultra-low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

After integrates with WiFi and Bluetooth e-Paper Driver Board - ESP32 Wireless, you can display graphics and text from ESP32:

After integrates with Universal e-Paper Raw Panel Driver HAT, you can display graphics and text from Raspberry Pi/Arduino or other boards:

Dimension:

• It's a Raw Display Panel, requires an embedded controller or driver HAT. Example:
  • Universal E-paper ESP8266 Driver Controller
  • WiFi and Bluetooth e-Paper Driver Board - ESP32 Wireless
  • Universal e-Paper Raw Panel Driver HAT
• No backlight
• Keeps displaying last content for a long time even when power down
• Ultra-low power consumption, basically power is only required for refreshing
• Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications:

• Operating voltage: 3.3V
• Interface: 3-wire SPI, 4-wire SPI
• Outline dimension: 125.40 × 99.50 × 1.18mm
• Display size: 119.232 × 88.320mm
• Dot pitch: 0.184 × 0.184mm
• Resolution: 648 × 480 pixels
• Display color: Black, White
• Grey level: 2
• Full refresh time: 5s
• Refresh power: 26.4mW(typ.)
• Standby current: 170°

• 1 x 5.83 inch E-Ink Raw Display Panel - Dual-color

• 5.83 inch E-Ink Raw Display Panel, WaveShare wiki
• Datasheet
• Instruction about making a new font
• Make BMP file for e-Paper
• Waveshare e-Paper, GitHub
• Waveshare e-Paper display with SPI, Arduino forum
• E-Paper Calendar with iCal sync and live weather (shared by user), GitHub