Arduino OPLA IoT (Internet of Things) Starter Kit

Cashback: RM23.85
  • 3 or more RM779.10
  • 5 or more RM763.20
  • Availability: 2

    Buy locally from a partner


    Add smart technology to your home and workplace with the first Open programmable IoT platform that allows you to build custom IoT devices, out of the box!



     The Oplà IoT Kit allows you to add connectivity to devices around the home or workplace. It comes complete with a set of 8 Internet of Things self assemble projects ready to show you how to turn everyday appliances into ‘smart appliances’ and build custom connected devices that can be controlled with your mobile phone. Here are the projects:


    For more advanced users the kit provides them with the potential to create their own connected devices and IoT applications through the open programmable platform providing the ultimate control.


    The Oplà unit acts as the physical interface with the Arduino IoT Cloud providing you with total control at your fingertips via the Arduino IoT Remote app. Configure and manage all the settings via the Arduino IoT Cloud, with easy to create dashboards providing real-time readings from your smart devices around the home or workplace. Adjusting settings, switching devices on/off, watering plants, etc is all controllable on the go with the Arduino IoT Remote app or fully automate the set-up then sit back and enjoy!


    With the Oplà IoT Kit, you can claim 12 free months* of Arduino Cloud Maker Plan - the premium subscription to our online coding platform.
    You will benefit from unlimited compilation time and all the other premium features. 

    Note: In order to activate the free 12 months subscription, it is required to enter a credit card number for verification (no charge will be applied).


    MKR IoT Carrier

    Control what you want, how you want to. The MKR IoT Carrier provides infinite possibilities for IoT projects. No soldering required! The integrated sensors, circuits and display leave you free to focus on programming and prototyping your ideas, rather than wiring and troubleshooting.

    Data Capture: Map the environment around the carrier using the integrated temperature, humidity, and pressure sensors and collect data about movement using the 6 axis IMU and light, gesture, and proximity sensors. Easily add more external sensors to capture more data from more sources via the on-board Grove connectors (x3) Data Storage: Capture and store all the data locally on an SD card, or connect to the Arduino IoT Cloud* for real-time data capture, storage, and visualization.


    Data Visualisation: Locally view real-time sensor readings on the built-in OLED Color Display and create visual or sound prompts using the embedded LEDs and buzzer.


    Total Control: Directly control small-voltage electronic appliances using the onboard relays and the five tactile buttons, with the integrated display providing a handy on-device interface for immediate control. Alternatively, connect to the Arduino IoT Cloud* to manage and control your device remotely on a smartphone via the Arduino Remote IoT app.


    Simply attach any of the MKR family boards to provide the connectivity type of choice (WiFi, BT, GSM, LoRa, NB-IoT) and seamlessly integrate with the Arduino IoT Cloud. All the MKR family boards share a common pinout to easily connect with the MKR IoT Carrier. An Arduino MKR WiFi 1010 board (included in the kit) is recommended for effortless WiFi or Bluetooth connection to the cloud or other boards.


    MKR WIFI 1010

    The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device sending data to a cellphone, the MKR WiFi 1010 is your one-stop solution for many of the basic IoT application scenarios. 

    See what Massimo Banzi, Arduino Co-founder, has to say about this board in the following video.

    The board's main processor is a low-power Arm® Cortex®-M0 32-bit SAMD21, like in the other boards within the Arduino MKR family. The WiFi and Bluetooth® connectivity is performed with a module from u-blox, the NINA-W10, a low-power chipset operating in the 2.4GHz range. On top of that, secure communication is ensured through the Microchip® ECC508 crypto chip. Besides that, you can find a battery charger, and a directional RGB LED on-board.



    Warranty Period: 12 months
    • MKR IoT Carrier
      • Comes with onboard sensors:
        • Pressure sensor: LPS22HB
        • IMU: LSM6DS3
        • Humidity and Temperature sensor: HTS221
        • Ambient light, gesture and proximity sensor: APDS-9960
        • 5 x Capacitive buttons: Qtouch Pad
        • Display: KD013QVFMD002-01
      • Buzzer
      • 2x 24V Relays: V23079
      • 5x RGB LEDs
      • 2x Grove to Analog Input/Output
      • Grove to I2C Input/Output
      • SD Card slot (SD card NOT included)
      • Battey holder (Battery NOT included): 18650 Li-Ion rechargeable battery
    • MKR WiFi 1010
      • Microcontroller: SAMD21 Cortex®-M0+ 32bit low power ARM MCU
      • Radio module: eu-blox NINA-W102
      • Board Power Supply (USB/VIN): 5V
      • Secure Element: ATECC508
      • Supported Battery: Li-Po Single Cell, 3.7V, 1024mAh Minimum
      • Circuit Operating Voltage: 3.3V
      • Digital I/O Pins: 8
      • PWM Pins: 13 (0 .. 8, 10, 12, 18 / A3, 19 / A4)
      • UART: 1
      • SPI: 1
      • I2C: 1
      • Analog Input Pins: 7 (ADC 8/10/12 bit)
      • Analog Output Pins: 1 (DAC 10 bit)
      • External Interrupts: 10 (0, 1, 4, 5, 6, 7, 8,9, 16 / A1, 17 / A2)
      • DC Current per I/O Pin: 7 mA
      • CPU Flash Memory: 256 KB (internal)
      • SRAM: 32 KB
      • No EEPROM
      • Clock Speed: 32.768 kHz (RTC), 48 MHz
      • LED_BUILTIN: 6
      • USB: Full-Speed USB Device and embedded Host
    Packing List

    Packing list:

    • 1 x MKR IoT Carrier
    • 1 x Arduino MKR WiFi 1010
    • 1 x Plastic encasing
    • 1 x Micro USB cable
    • 1 x Moisture sensor
    • 1 x PIR sensor
    • 1 x Plug-and-play cables for all the sensors

    Q & A (1)

    Ask a question

    • 5 out of 5
    • 5
    • 4
    • 3
    • 2
    • 1
    Sort By:

    Tags: Arduino, Genuino, IoT, SAMD21, WiFi, Onboard Sensors, IoT Cloud, Internet of Things