Aluminum 2WD TT Robot/Motor Chassis - Purple

I like the purple color:) It matches Maker UNO.

This Aluminum Chassis in Blinka purple makes for an excellent robot body. It's a single piece of bent 2mm thick aluminum, with a variety of holes, slots, and cutouts for mounting boards, sensors, and servos. The sides are notched to fit two DC Gear 'TT' motors perfectly - There are four M3 and nuts are included for mounting the motors. In the front, you can screw on a ball caster. You can build a very sturdy (and quite handsome!) little robot rover with this metal frame.

• It's made of aluminum so it's light and strong
• The anodizing is quite attractive as a mobile robot, if you use Maker UNO, it looks awesome
• Can be used to build a 2-wheel mobile robot
• Tons of mounting holes & slots!
• You can drill and cut aluminum so it's easy to modify
• There are ready mounting holes for Arduino UNO, and Raspberry Pi 3 B/B+ (though, for Raspberry Pi, there is some slight error).

Note: This is a kit with loose parts, you need to assemble it yourself, DIY :)

• 1 x Purple Color Aluminum Chassis
• 2 x DC Gearbox "TT" Motors (Yellow color)
• 2 x "TT" Wheels (White Rim with Black Tyres, 66mm diameter, 15mm thickness)
• 1 x Metal Ball Caster (metal ball, plastic holder)
• 4 x M3, 25mm bolt + nut (To mount "TT" motor to the chassis)
• 2 x M3, 6mm bolt + nut (To mount the caster to the chassis, a nut is not needed though )
• 2 x 15mm self-taping screw (secure wheel to "TT" motor shaft)

Then you will also need a microcontroller and motor driver that can drive the 5V DC motors. We recommend one of the following:

• Arduino UNO, or CT-UNO or Maker UNO
• Shield-2AMotor (drives two motors)
• Raspberry Pi 3B/B+

• Mechanical Drawing