Acrylic Case with Cooling Fan for Jetson Nano 2GB

It is always good to protect your single-board computer, and that includes the NVIDIA Jetson Nano 2GB. Cytron Marketplace now carries the Acrylic case with a cooling fan for this Jetson Nano development kit.

This is the Acrylic case with a cooling fan included. The Acrylic plates are clear transparent types and you need to peel off the protective sheet on both surfaces before assembling it. This case is specially designed for the NVIDIA Jetson Nano 2GB Dev Kit board and is made of transparent acrylic. The front side of the casing is reserved with a type-C power supply, the HDMI display interface, USB interfaces, network cable, and Micro USB interface holes; the left side of the casing possess an onboard camera wiring hole area that is easy for user installation; the right side with GPIO interface and POE interface is convenient for the user to connect to the external device; the backside reserves two holes of the wireless network card antenna, and a hole to install TF card. It also has an anti-reverse cooling fan and supports fix the camera bracket! The overall appearance is good-looking, practical, and integrated.

Note: This case does not come with Jetson Nano 2GB, camera module, camera bracket, and USB Wireless Network Card. Please get them separately.

The case reserve the opening for you to access the microSD card slot, camera FFC cable, USB interface and it is easy for expansion.

Here's a Jeston NANO 2G Acrylic Case installation video:

Note:

1. When installing the bottom plate of the acrylic shell, the side with the Yahboom website address needs to face the bottom.
2. There are no screw threads on the heat sink of the Jetson Nano board, it is normal. It is a self-tapping method :) Just screw it until it is tight enough.

Features:

• Acrylic case for Jetson Nano 2GB Dev kit
• Support fix the camera bracket
• Supports cooling fan with anti-reverse connection
• Clever opening design, easy access to the peripheral connectors
• DIY (Do It Yourself) case
• Take around 5 to 10 minutes to assemble

Packing list:

• 1 x 6-piece acrylic plate set
• 4 x M2*37 copper column
• 4 x M2*8 copper  
• 16 x M2*4 round head screw
• 4 x M3*12 round head screw
• 1 x Cooling Fan
• 4 x Plastic rivet (for camera bracket)

Resources:

• Assembly manual, pdf file
• Jetson Nano Acrylic Case repository