Note: 3 x AAA battery in series provides up to 4.5V (nominal), it is NOT for micro:bit. Please do not connect this battery holder to the micro:bit.
This unique three-cell AAA battery holder fits perfectly for the Makeblock Halocode. The 6" (~150mm) cable has been terminated with a JST-PH connector which mates the JST socket on the Makeblock Halocode board perfectly, hence making any of your projects completely portable.
This battery holder connects 3 AAA batteries together in series for powering Halocode. The box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries, and have an on-off switch. That makes them ideal for use with Li-ion or Lipo powered projects that have a 2-pin JST connector meant for Li-Ion/Poly batteries. Of course, you can't recharge them like Li-Ion/Polys, so don't try to plug this into one of our Li-Ion/Poly charger boards!
Fits any standard AAA battery. When using rechargeable NiMH batteries, the output voltage will range from about 3.7V with charged batteries to 2.7V at the end of charge with a nominal voltage of 3.6V. When using alkalines, the output will range from 4.6V with new batteries to 3.3V at the end of life with a nominal voltage of about 4.5V.
Note: This product is only the battery holder. The Halocode is NOT included.
Features and specifications:
- 3xAAA batteries
- Compatible with AAA batteries:
- Connect batteries in series
- PH2.0-2P interface
- With on/off switch
- Length of wire: 15cm/6” (appx.)
- 1 x 3xAAA Battery Holder with PH2.0