📘Learn Digital Making weekly on Telegram. Join Channel Now📱

UPS Plus V6 For Raspberry Pi

Availability: Discontinued

Buy locally from a partner

Country:

Accessories you may need

Description

UPS Plus is a new generation of UPS power management modules. It is designed with a “battery protection” function. The UPS can be configured to turn off the power when it detects that the battery power is low, to prevent the battery from over-discharging. It supports OTA firmware upgrade and supports RTC onboard.

And there are two INA219 chips onboard to detect 18650 lithium batteries voltage and voltage output from UPS Plus to Raspberry Pi.

Note: You have to enable the I2C function by using the "raspi-config" tool. Navigate to "interface options" and select "I2C" and enable it to follow the instructions. It is very important to enable I2C function on Raspberry Pi. Otherwise, Raspberry Pi will not detect UPSPLUS module.

Onboard components:


 

LED light status definition:

  • Charging:

  • Discharging:

 

How to assemble:

Note: DO NOT use different types of batteries at the same time! Please make sure the batteries are inserted with the correct polarity. Otherwise, the device will be damaged. 
Note: 18650 lithium batteries are not included. Please get them separately.

 

Warranty Period: 12 months
Features
  • Easy to install
  • Enhanced power management
  • Remote OTA firmware upgrade
  • Programmable BACK-TO-AC auto power-up
  • Programmable sample period
  • I2C communication
  • Standalone RTC
  • Support stacked battery design
  • Compatible with:
    • Raspberry Pi A
    • Raspberry Pi A+
    • Raspberry Pi B
    • Raspberry Pi B+
    • Raspberry Pi 2B
    • Raspberry Pi 3B
    • Raspberry Pi 3B+
    • Raspberry Pi 4B

Specifications:

  • Current/voltage monitoring of Raspberry Pi power supply port.
  • Battery terminal current/voltage monitoring supports two-way monitoring of charge and discharge.
  • Independent RTC function.
  • OTA function (supports forced upgrade mode and active upgrade mode).
  • Power estimation
    Note: At least one full charge and discharge cycle must be completed!)
  • Adjustable sampling period.
  • Support FCP, AFC, SFCP fast charge protocol.
  • Support BC1.2 charging protocol.
  • Battery temperature monitoring
    Note: The forced temperature protection cannot be turned off, threshold: 65 degrees!
  • Programmable Power Voltage Detector(PVD) function, Default value: 3.6V
  • Incoming call self-start function.
  • Power down memory function.
  • Programmable shutdown / forced restart.
  • Running time statistics
  • Electrostatic protection.
  • Linear compensation range discharge capacity: 5V 4.5A.
  • Non-linear compensation range discharge capacity: 5V 8A.
  • Charging capacity 4.5V 5A/5V 2.5A/9V 2A/12V 1.5A.
  • Stacked battery design
    Note: Stacked power boards need to be special accessories. Does not support unofficial accessories.
  • Use I2C communication without occupying additional ports.
  • Support 4.2V 4.35V 4.4V 4.5V 18650 lithium battery
    Note: Different types of batteries cannot be mixed!
  • After-sales data telemetry.

 

Packing List

Packing list:

  • 1 x UPS Plus For Raspberry Pi
  • 4 x M2.5 copper pillar
  • 4 x M2.5 screws
  • 4 x M2.5 long copper stick
  • 4 x M2.5 nuts
  • 1 x Acrylic shield
  • 1 x Instructions

 

Resources

Q & A (4)

Ask a question

Reviews
  • 5 out of 5
                  
  • 5
    100%
  • 4
    0%
  • 3
    0%
  • 2
    0%
  • 1
    0%
Sort By:

Tags: UPS Plus, GeeekPi UPS V5, UPS for Raspberry Pi, RPi HAT