HAT for RPi 3
Note: Maker pHAT is in Rev1.1 (which uses FDTI FT231X as USB to UART chip) starting from Jan 2019. Check the review by MagPi (the official Magazine of Raspb..
Note: From 10th Aug onwards, the wireless HAT is updated to the latest version. Compared with the old version, the new version has the following changes:Newly ..
RS485 is one of the most robust wired serial communication protocol that can support distance upto 1200 meters (4000 ft) while CAN (Controller Area Network) is used in au..
NB-IoT is a new wireless technology in LPWAN (Low Power Wide Area Network). Different from LoRa or Sigfox, NB-IoT comes from Telco infrastructures, in Malaysia, it must b..
This Raspberry Pi GPIO Expansion Board converts the single GPIO headers on your Raspberry Pi into triple parts, enabling more breakout pins, add-on boards or just about a..
This is a LCD display HAT for Raspberry Pi, 1.44inch diagonal, 128x128 pixels, with embedded controller, communicating via SPI interface. It also comes with three push bu..
GrovePi+ is a system with 15 Grove 4-pin interfaces that brings Grove sensors to the Raspberry Pi. It is the newest version compatible with Raspberry model B/B+ and A+ pe..
Raspberry Pi has become so popular, it is not only for education but also being used in Robotics too. In many cases, RC (remote control) servos are used in robotics and y..
If you are new to Raspberry Pi Single Board Computer and wanted to get your hands dirty with electronics and sensors, this sense HAT should be for you.And do you ..
This is the easy to use Raspberry Pi GPIO expansion board, compatible with raspberry pi 3 Pi 2 model B and B+. It expands the 40-pin GPIO of Raspberry Pi to another set o..
Note: This is the latest revision of the official Power over Ethernet (PoE) HAT, the PoE+(Plus) HAT, launched on 24th May 2021. The IEEE 802.3at Compliant,..
This is a Multi-function cooling expansion board designed for the Raspberry Pi board. It is compatible with the:Raspberry Pi 4 Model B
ReSpeaker 2-Mics Pi HAT is a dual-microphone expansion board for Raspberry Pi designed for AI and voice applications. This means that you can build a more powerful and fl..
Ever wanted to automate your home by controlling AC appliances like light or fan? Well, this HAT might be perfect for you if you are using Raspberry Pi as the controller...
Ever think of making fully portable Raspberry Pi? Now you can with this Li-ion Battery HAT. This Li-ion Battery HAT integrates SW6106 power bank management chip, to provi..
Note: This 2.13-inch E-Ink display HAT is updated from V2 to V3 from October 2020 onwards.E-Ink (Electronic Ink) display has several benefits compared to other di..
Note: From 25th March 2021 onwards, the X708 HAT is updated to X708 V1.2 from V1.0.Note: The U100-A1 bracket and mounting screw & nuts are NOT included in X708 V1.2
The super audiophile DAC for the Raspberry Pi. This latest revision of the Pi-DAC PRO is pre-programmed for auto-detection and exposes the full Raspberry Pi GPIO header p..
Looking for high current motor driver for Raspberry Pi? Here you go, dual channels 10A continuous motor driver for Raspberry Pi.Cytron's latest motor driver is design..
This is a universal driver board for e-Paper raw panels, can be used to drive various SPI interface e-Paper from that we carry.Out of the box, it can be stacked o..