📘Learn Digital Making weekly on Telegram. Join Channel Now📱

100W Adjustable DC Boost Converter with Display

Availability: Discontinued

Buy locally from a partner

Country:
Description

Electronic Project need power supply and in some cases, you might need to step-up or boost the voltage. Example from 4xAA battery, step up voltage to 12V and power the Arduino via DC jack input.

Well, this high power adjustable boost convert will helps you. Comes with 3 digits 7-segment display to show the Vin or Vout (configureable via push button), you do not need additional multimeter to measure the input or output voltage :) Very Handy and beginner friendly. With the built-in multiturn (high percision) potentiometer/variable resistor/adjustable resistor, you can easily adjust the output voltage (step up) with a flat screw driver. To dissipate heat generated and provides continuous high efficiency, the module is mounted with a heatsink too. How awesome is that?

This boost converter supports wide range of input voltage from 3.0V to 35VDC, and is able to boost/step up voltage upto 35V.

Note: This is a boost/step up converter, Output Voltage is equal or greater than Input Voltage even it is adjustable.

From our tests, the maximum continuous output current is 6A if the Vout > Vin is less than 2V. Peak output current is at 9A. The more voltage difference between Vout and Vin, the more heat is generated and less continuous output current.

Since it is switching module (SMPS, Switch Module Power Supply), it offers high power efficiency, maxixum of 96.7%.

Note: By default, the 7-segment display will shows voltage of Vin, short press the push button will switch the 7-segment to show Vout. Press and hold for 3 seconds, the display will off to save power.

Features and Specs:

  • SMPS module
  • Boost Converter Switching Power Module
  • Adjustable output voltage: 3.5V to 35V
  • Wide range input voltage: 3.0V to 35V
  • Vin < 4V, the 7 segment display is disabled
  • Step up converter, Vout >= Vin
  • Comes with 3-digit 7 segment display, to show Vin or Vout (LED indicator)
  • A Push Button to configure the 7 segment display
  • Maximum output current:
    • Peak: 9A
    • Maximum Continuous: 6A
  • Output voltage ripple: 24mV
  • Efficiency: 96.7% max
  • Rated Power: 75W
  • No reverse polarity protection
  • Dimension: 67mm x 43mm x 12mm
Warranty Period: 12 months
Packing List
  • 1 x 100W Adjustable DC Boost Converter with Display
Q & A (4)

Ask a question

Reviews
  • 5 out of 5
                  
  • 5
    100%
  • 4
    0%
  • 3
    0%
  • 2
    0%
  • 1
    0%
Sort By:

Tags: Step up, converter, DC to DC, SMPS, LTC1871