📘Learn Digital Making weekly on Telegram. Join Channel Now📱

2.7inch E-Ink display HAT for Raspberry Pi, three-color

Availability: Discontinued

Buy locally from a partner

Country:
Description

E-Ink (Electronic Ink) display has several benefits compared to other display technologies:

  • High Visibility and Contrast
  • Wide viewing angle
  • and super low power consumption. It can retain the display for a very long time after power is removed

This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra-low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf labels, industrial instruments, and so on.

 

 

Interface:

Dimensions:

Warranty Period: 12 months
Features
  • No backlight keeps displaying last content for a long time even when power down
  • Ultra-low power consumption, basically power is only required for refreshing
  • Compatible with:
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
  • Stack perfectly on Raspberry Pi 4B/3B/3B+ via the 40-pin GPIO header.

Specifications:

  • Operating voltage: 3.3V/5V
  • Interface: 3-wire SPI, 4-wire SPI
  • Outline dimension: 73.50 × 56mm
  • Display size: 57.288mm × 38.192mm
  • Dot pitch: 0.217 × 0.217
  • Resolution: 264 × 176 pixels
  • Display color: red, black, white
  • Grey level: 2
  • Full refresh time: 15s
  • Refresh power: 26.4mW(typ.)
  • Standby Current:  less than 0.01uA (almost none)
  • Standby power: 170°
Packing List
  • 1 x 2.7inch E-Ink display HAT (3 colors) board
  • 1 x 8-way JST plug to pigtail jumper wire (female socket terminated)
  • 4 x 15mm spacer (2.00 mm diameter) with screws and nuts
Q & A (3)

Ask a question

Reviews
  • 4.9 out of 5
                  
  • 5
    94.74%
  • 4
    5.26%
  • 3
    0%
  • 2
    0%
  • 1
    0%
Sort By:

Tags: 264x176, E-INK