Description
This AlphaBot2 robot kit is designed to use with an Arduino UNO compatible controller (not included). It features rich common robot functions including line tracking, obstacle avoiding, ultrasonic ranging, infrared remote control, Bluetooth communication, etc.
Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, with no soldering, no wiring. After a few minutes spent on hardware assembly, you're almost there, our open source demo codes are ready to help you get started fast.
The controller, which is Arduino UNO or Arduino UNO compatible is not included. You can get it separately here:
Arduino UNO R3 (Original from Arduino.cc)CT-UNO (Arduino UNO R3 compatible from Cytron)CT-UNO-SE (Arduino UNO R3 compatible special edition from Cytron)Â
Â
Â
Â
Warranty Period: 12 months
Features
AlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility. AlphaBot2-Base, the lower base chassis:5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking Onboard modules like line tracking, obstacle avoiding, needs no messy wiring TB6612FNG dual H-bridge motor driver, compared with L298P, it's more efficient, more compact, and less heating Micro gear motor , with metal gears, low noise, high accuracyOnboard RGB LEDs, true color lighting, pretty cool AlphaBot2-Ar, the upper adapter board for controller:Onboard Arduino interface, into which Arduino controller can be directly plugged 0.96inch 128x64 yellow/blue dual color OLED TLC1543 AD acquisition chip PC8574 I/O expander, avoid I/O shortage XBee connector, for connecting dual-mode Bluetooth module Note: The AlphaBot2 does not come with the 14500 Li-ion batteries, we recommend get 14500 600mAh here .
AlphaBot2-Base consists of:
AlphaBot2 control interface: for connecting sorts of the controller adapter boardUltrasonic module interface Obstacle avoiding indicators Omni-direction wheel ST188: reflective infrared photoelectric sensor, for obstacle avoidingITR20001/T: reflective infrared photoelectric sensor, for line trackingPotentiometer for adjusting obstacle avoiding a rangeTB6612FNG dual H-bridge motor driverLM393 voltage comparatorMicro gear motor reduction rate 1:30, 6V/600RPMRubber wheels diameter 42mm, width 19mmPower switch Battery holder : supports 14500 batteries (not included) WS2812B : true color RGB LEDsPower indicator AlphaBot2-Ar (Top) consists of:
AlphaBot2 control interface : for connecting AlphaBot2-BaseArduino expansion header : for connecting Arduino shieldsArduino interface : for connecting Arduino compatible controller, Arduino UNO R3, or CT-UNOXBee connector : for connecting dual-mode Bluetooth module, remotely control the robot via BluetoothIR receiver PC8574 : I/O expander, SPI interfaceArduino peripheral jumpers TLC1543 : 10-bit AD acquisition chipBuzzer 0.96inch OLED SSD1306 driver, 128x64 resolutionJoystick Note: photos are FOR REFERENCE ONLY, the other boards/modules/accessories are NOT included in the price.
Dimension:
Packing List
1 x AlphaBot2 base board with motor and wheel assembled 1 x AlphaBot2 Arduino board (top) 1 x IR remote control 1 x small screw driver 1 x pack of PCB spacers 1 x HC-SR04 ultrasonic ranger 1 x USB microB cable 1 x FC 20-way cable (to connecto top and bottom board)
Resources
Examples:
AlphaBot2 multi robots line following
AlphaBot2-Ar robot line tracking
AlphaBot2-Ar robot obstacle avoiding
AlphaBot2-Ar robot Bluetooth control
Reviews
Average Rating: 5 out of 5
Tags: WaveShare ,
12911 ,
AlphaBot ,
Arduino Robot